|
|
 |
|
|
 |
 |
 |
|
|
ALLOYS
- ADMIRALTY BRASS TUBES
- 70/30 BRASS TUBES
- 63/37 BRASS TUBE
- 85/15 BRASS TUBES
- 60/40 BRASS TUBES
- NAVAL BRASS TUBES
- ALUMINIUM BRASS TUBES
- SILICON BRASS TUBES
This list is only indicative, we can supply
other brasses too. The tubes are available in all sizes and
standards
|
|
FREE CUTTING LEADED BRASS RODS
MANGANESE BRONZE RODS NAVAL RODS.
HIGH TENSILE RODSRIVETING RODS,FORGING RODS/td>
|
|
|
Brasses ( Copper , Zinc Alloys Products)
C21000 ( 95 Cu -5 Zn)
C22000 ( 90 Cu -10 Zn)
C23000 ( 85 Cu -15 Zn)
C24000 ( 80 Cu -20 Zn)
C26000 ( 70 Cu -30 Zn)
C26800, C27000 ( 65 Cu -35 Zn)
C28000 ( 60 Cu - 40 Zn)
|
|
| |
Coil Pancake
Thickness
Millimeters Inches
0.10-5.00 0.0039-0.1968
Width
10-500 0.393-19.685
Internal Diameter
100/150/200/250/300/400/500 3.93/5.90/7.87/9.84/11.81/11.81/15.74/19.68
Mill Width Coils
305/355/406/457/500 12/14/16/18/19.7
Cut to Length Sheets
Millimeters Inches
Thickness
0.20-4.00 0.007874-0.1574
Width
20-500 0.7874-19.685
Length
400-3000 15.748-118.110'
General Parameters
Standard Tolerances
Thickness: +/- 1.5 %
Width : +/- 0.5 %
Tolerances as per Customer' specific requirements or as per the chosen Standard of reference
Temper
Annealed to Spring Hard
Coil Weight
11.5 Kg/mm width Approx
|
| |
|
| Brass Billets are used in valves, pumps, impellers, supply-water faucets, bearings, sleeves, pressure seal casting, and ordinary mechanical parts. We manufacture brass billets / copper alloy billets in round, hex, square and flats, but brass billets / copper alloy billets in various shapes can be designed as per the requirement. |
| |
|
Alloy |
Wires |
Brass(Naval Brass,70/30 Brass, Rivetting Brass, Free Cutting Brass, 63/37 Brass) |
0.0787" - 0.709" (2 mm-18 mm ) |
|
|
 |
|
Types
Straight length Level would coils
Pancake
Capillary Sections
U-bend
PVC Coated
Low finned Tubes
Enhanced Surface Tubes
Alloys
- 95/5 COPPER NICKEL TUBES
- 90/10 COPPER NICKEL TUBE
- 70/30 COPPER NICKEL TUBES
- CUNIFER TUBES
This list is only indicative, we can supply other copper alloys too. The tubes are available in all sizes and standards |
| |
 |
TELLURIUM COPPER RODS
90 / 10 COPPER NICKEL RODS
70 / 30 COPPER NICKEL RODS
CADMIUM COPPER RODS
This list is only indicative, we can supply other copper alloys too. The Rod are available in all sizes and standards |
| |
 |
C11000 (Cu 99.99%) Electrolytic Tough Pitch
Copper
C12000 (Cu 99.90%) Phosphours-deoxidised copper,
Low residual (DLP)
C12200 (Cu 99.90%) Phosphours-deoxidised copper,
High residual (DHP) Nominal Composition>99.90%
Cu, 0.03% P
C715 (Composition 70:30 ), C 706
(Composition 90:10)
|
CUPRO NCIKEL |
Technical Specifications
|
Alloy |
Description |
Temper |
TensileStrength N/mm2 |
%Elongation 50mm |
Vickers Hardness HV |
Available Forms |
CuNi25CuNi10 |
Cupro Nickel |
Hard |
340 |
30 |
150-170 VPN |
Strips, Foils,Sheets |
Chemica Compositionl |
Cu% |
Zn |
Pb |
Fe |
C |
Mn |
S |
Ni |
Remaining |
0.20% |
0.01% |
0.30% |
0.05% |
0.50% |
0.02% |
24-26% / 9-11% |
Max |
Max |
Max |
Max |
Max |
Max |
|
|
| |
|
WIRE SIZE IN GENERAL |
Alloy |
Wires |
Copper Nickel (90/10 CuNI, 70/30 CuNi) (C706, C715) |
0.0787" - 0.709" (2 mm-18 mm ) |
|
| |
|
Gun Metal Ingots
We can supply gun metal in the form of ingots under dimensions as 104 mm width on bottom, 70 mm height & 9" length weighing approx 10 Kg's per ingot in alloys such as LG2, Low Pb RG5, C83600, C84400 etc.
Billets
We can supply brass billets in the size range of 5" uptill 10" in Leaded Brass alloys such as CDA 360, CDA 377, CDA 464, CDA 485, CDA 353, CDA 385 etc and Lead Free brass alloys such as CDA 260, CDA 270, CDA 272, CDA 274 |
|
 |
